Ricoh RDC-6000 Page 76 Operation Manual Download

Page: 76 / 125

Playing Back a File

This section provides instructions for playing back recorded image files.

■

Operation Flow

To play back an image file, follow the steps below:

Turn on the camera

Slide the power switch on and set the mode dial to [

] (p.75).

Select a file

Press the

▲ ▼

button to select a file. (p.75)

Switch the display mode

Switch the display mode between zoom and multi-image playback, and
so on.
See:

“Multi Image Playback” (p.77).
“Zoom Playback” (p.78)
“Auto Playback” (p.79)

■

Files that can be played on the camera

The following kinds of files can be played on this camera:
• Files recorded on this camera

• Data recorded on the Ricoh RDC-4200, 5000, 5300 digital camera.
• Files shot with another brand of camera

Note

• The “UNMATCHED FILE” message will be displayed if an unplayable file

is encountered.

• In some cases, data recorded with the cameras of other companies cannot

be played back.

Summary of Contents for RDC-6000






























































































































Search results

Summary of Contents for RDC-6000

Reviews:

Related manuals for RDC-6000

Brands by name

Popular brands

Ricoh RDC-6000, Operation Manual

Search results

Summary of Contents for RDC-6000

Reviews:

Related manuals for RDC-6000

Brands by name

Popular brands