Ricoh RDC-6000 Operation Manual Download | Manualshive

Page: 123 / 125

background image

121

Appendix

INFORMATION TO THE USER

USA FCC Part15 Class B
The equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, user, and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. In this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment to outlet on a circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV technician for help. (FCC 15.105B)
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. (FCC 15.21)
Properly shielded and grounded cables and connectors must be used for connection to
a host computer in order to comply with FCC emission limits. (FCC 15.27)
An AC adapter with a ferrite core must be used for RF interference suppression.

COMPLIANCE INFORMATION STATEMENT

Product Name: IMAGE CAPTURING DEVICE
Model Number: RDC-6000
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including

interference that may cause undesired operation.

RICOH CORPORATION
5 Dedrick Place, West Caldwell NJ, 07006

Tel.: 1-800-225-1899

Note to Users in Canada

Note: This Class B digital apparatus complies with Canadian ICES-003

Remarque Concernant les Utilisateurs au Canada

Avertissement: Cet appareil numerique de la classe B est conforme a la norme NMB-
003 du Canada

IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS DANGER-
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.

«
...
121
122
123
124
125
»

Summary of Contents for RDC-6000






























































































































Reviews:

No comments

Related manuals for RDC-6000

PowerShot SX210 IS

Brand: Canon Pages: 180

PowerShot SD430 DIGITAL ELPH WIRELESS

Brand: Canon Pages: 7

PowerShot SD630 Digital ELPH Camera

Brand: Canon Pages: 137

Brand: Canon Pages: 2

Brand: Samsung Pages: 98

Brand: Datalogic Pages: 56

Brand: Datalogic Pages: 4

Brand: Lasonic Pages: 1

Visiondrive 84 04 63

Brand: Conrad Pages: 8

Brand: CIS Pages: 29

Brand: Gates Pages: 53

Brand: Tamron Pages: 4

Brand: Casio Pages: 143

Brand: Kramer Pages: 3

Brand: Pentax Pages: 98

Brand: e2v Pages: 66

Brand: Dalsa Pages: 90

Brand: Insignia Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands