Ricoh RDC-6000 Page 118 Operation Manual Download

Page: 118 / 125

116

Note

• Before sending the camera in for repair, check the batteries and read this

instruction manual again to ensure proper operation.

• Some repairs require a significant amount of time to be completed.

Please allow sufficient time for repairs.

• When sending the camera to a service representative, please include a

note which describes the defective part and the problem as precisely as

possible.

• Remove all accessories not related to the problem before sending the

camera to a service representative.

• Before taking any important pictures (such as at weddings, on trips

abroad, etc.) test the camera to check its operation and ensure proper
functioning. We recommended that you keep this manual and spare
batteries on hand.

Summary of Contents for RDC-6000






























































































































Search results

Summary of Contents for RDC-6000

Reviews:

Related manuals for RDC-6000

Brands by name

Popular brands

Ricoh RDC-6000, Operation Manual

Search results

Summary of Contents for RDC-6000

Reviews:

Related manuals for RDC-6000

Brands by name

Popular brands