Ricoh RDC-6000 Operation Manual Download

Page: 27 / 125

Getting Started

Powering the Camera

The following explains how to load and charge the battery and how to use a home
power outlet as the power source.

Loading the Battery

Load the battery (rechargeable type lithium ion battery) and operate the camera.

Important

Note

• Always charge the battery when using it for the first time. (The battery is

not charged at the factory.)

➝

Page 27 “Charging the Battery”.

Make sure the camera power is turned
off, then open the battery cover by
pressing down and sliding.

See

Reference: page 41 “Turning on the
Camera”.

Load the battery.

Important

Note

• Do not touch the battery or camera

electrical contacts because this could
cause damage due to static electricity.

Close the battery cover.

Make sure the battery cover is firmly closed.

Summary of Contents for RDC-6000






























































































































Search results

Summary of Contents for RDC-6000

Reviews:

Related manuals for RDC-6000

Brands by name

Popular brands

Ricoh RDC-6000, Operation Manual

Search results

Summary of Contents for RDC-6000

Reviews:

Related manuals for RDC-6000

Brands by name

Popular brands