manualshive.com logo in svg

Ricoh InfoPrint 1759, User Manual, Page: 234 / 272

Share
Download
Ricoh InfoPrint 1759 User Manual Download Page 234

Check to see if the paper tray is empty

Load paper in the tray.

Make sure the correct printer software is installed

•

Verify that you are using the correct printer software.

•

If you are using a USB port, make sure you are running Windows Vista, Windows XP, Windows Server 2003,
or Windows 2000/Me/98 and using compatible printer software.

Make sure the internal print server is installed properly and working

•

Make sure the internal print server is properly installed and that the printer is connected to the network.

•

Print a network setup page and check that the status shows 

Connected

. If the status is 

Not Connected

, check

the network cables, and then try printing the network setup page again. Contact your system support person to
make sure the network is functioning correctly.

Make sure you are using a recommended USB, serial, or Ethernet cable

For more information contact the place where you bought the printer.

Make sure printer cables are securely connected

Check the cable connections to the printer and print server to make sure they are secure.

For more information, see the setup documentation that came with the printer.

Confidential and other held jobs do not print

These are possible solutions. Try one or more of the following:

Has a formatting error occurred?

If so, delete the job and try printing it again. Only part of the job may print.

Make sure the printer has sufficient memory

Free up additional printer memory by scrolling through the list of held jobs and deleting some of them.

Check to see if the printer has received invalid data

Delete invalid jobs.

Job takes longer than expected to print

These are possible solutions. Try one or more of the following:

Reduce the complexity of the print job

Eliminate the number and size of fonts, the number and complexity of images, and the number of pages in the job.

Change the Page Protect setting to Off

1

Make sure the printer is on and 

Ready

 appears.

2

On the home screen, touch 

.

3

Touch 

Settings

.

4

Touch 

General Settings

.

5

Touch 

 repeatedly until 

Print Recovery

 appears.

 

234

Summary of Contents for InfoPrint 1759

















































































































































































































































































Reviews:

No comments