manualshive.com logo in svg

Ricoh InfoPrint 1759, User Manual, Page: 232 / 272

Share
Download
Ricoh InfoPrint 1759 User Manual Download Page 232

Troubleshooting

Checking an unresponsive printer

If your printer is not responding, make sure:

•

The power cord is plugged into the printer and a properly grounded electrical outlet.

•

The electrical outlet is not turned off by any switch or breaker.

•

The 

Ground Fault Circuit Interrupter

 (GFCI) has not tripped.

From the back of the printer, press the GFCI 

Reset

 button located above the printer power cord.

•

The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.

•

Other electrical equipment plugged into the outlet is working.

•

The printer is turned on.

•

The printer cable is securely attached to the printer and the host computer, print server, option, or other network
device.

Once you have checked each of these possibilities, turn the printer off and then back on. This often fixes the problem.

Door A will not shut properly

Make sure the green paper jam clearance lever behind Door A is in place:

1

Press down on the white release lever beneath Door A at the top of the printer, and then open the door.

 

232

Summary of Contents for InfoPrint 1759

















































































































































































































































































Reviews:

No comments