Ricoh InfoPrint 1759 User Manual Download Page 184

Page: 184 / 272

Menu item

Description

IPv6

Enable DHCPv6

Yes

Enables DHCPv6 in the printer

Note:

No is the factory default setting.

E-mail Server Setup menu

Use the following menu to configure the SMTP e-mail server.

Menu item

Description

E-mail Server Setup

Primary SMTP Gateway

Primary SMTP Gateway Port

Secondary SMTP Gateway

Secondary SMTP Gateway Port

Specifies SMTP server port information

Note:

25 is the default SMTP gateway port.

E-mail Server Setup

SMTP Timeout

5–30

Specifies the amount of time in seconds before the server stops
trying to send the e-mail

Note:

30 seconds is the factory default setting.

E-mail Server Setup

SMTP Server Authentication

Off

Device Userid and password

User ID and password

User e-mail and password

Specifies the type of user authentication required for scan to e-mail
privileges

Note:

Off is the factory default setting.

E-mail Server Setup

Device Userid

Password

Reply Address

Subject

Message

Specifies e-mail server information

Note:

The message box has a limitation of 512 characters.

E-mail Server Setup

Send me a copy

Never appears

On by default

Off by default

Always On

Sends a copy of the e-mail back to the creator of the e-mail

E-mail Server Setup

Max e-mail size

0–65535 kB

Specifies the maximum e-mail size in kilobytes

Note:

E-mail above the specified size is not sent.

E-mail Server Setup

Size Error Message

Sends a message when an e-mail is greater than the configured size
limit

184

Summary of Contents for InfoPrint 1759

















































































































































































































































































Search results

Summary of Contents for InfoPrint 1759

Reviews:

Ricoh InfoPrint 1759, User Manual, Page: 184 / 272

Search results

Summary of Contents for InfoPrint 1759

Reviews: