manualshive.com logo in svg

Ricoh InfoPrint 1759, User Manual, Page: 168 / 272

Share
Download
Ricoh InfoPrint 1759 User Manual Download Page 168

Menu item

Description

Job Acct Stat

Print

Clear

Prints a list of all stored job statistics or deletes the information from the printer
hard disk

Notes:

•

A printer hard disk must be installed in the printer and operating properly
for this menu item to be available.

•

Selecting Print prints a list of statistics.

•

Clear deletes all job statistics stored on the printer hard disk. 

Clearing

job account statistics

 appears on the display.

•

The Clear selection will not appear if Job Accounting is set to
MarkTrack

TM

.

Activate Hex Trace

<none>

Assists in isolating the source of a print job problem

Notes:

•

When Hex Trace is activated, all data sent to the printer is printed in
hexadecimal and character representation and control codes are not
executed.

•

To exit Hex Trace, turn the printer off, or reset the printer.

Coverage Estimator

Off

On

Provides an estimate of the percentage coverage of cyan, magenta, yellow,
and black on a page. The estimate is printed on a separator page.

Note: 

Off is the factory default setting.

Setup menu

Menu item

Description

Printer Language

PS Emulation

PCL Emulation

Specifies the printer language used to communicate data from the computer
to the printer

Notes:

•

PCL emulation uses a PCL interpreter for processing print jobs. PostScript
emulation uses a PS interpreter for processing print jobs. PPDS emulation
uses a PPDS interpreter for processing print jobs.

•

The factory default printer language varies depending on the type of printer
purchased.

•

Setting a printer language as the default does not prevent a program from
sending print jobs that use another printer language.

Resource Save

Off

On

Specifies how the printer handles temporary downloads, such as fonts and
macros stored in RAM, when the printer receives a job that requires more
memory than is available

Notes:

•

Off is the factory default setting. Off sets the printer to retain the downloads
only until memory is needed. Downloads are deleted in order to process
print jobs.

•

The On setting retains the downloads during language changes and printer
resets. If the printer runs out of memory, 

38 Memory Full

 appears, and

downloads are not deleted.

 

168

Summary of Contents for InfoPrint 1759

















































































































































































































































































Reviews:

No comments