Ricoh InfoPrint 1759, User Manual, Page: 231 / 272

5
Click TCP/IP Port Access .
6
Select the Secure Mode Active check box.
Note: If Secure Mode Active is gray or not selectable, create an administrative password and try again.
7
Select a setting for each listed port, and then click Submit .
There are three ways to configure the TCP and UDP network ports:
•
Disabled —Port is disabled and never allows network connections
•
Secure and Unsecure —Port is always open including when the printer is in Secure mode
•
Unsecured Only —Port is open only when printer is in Secure mode
231