Ricoh Aficio MP 2500 Facsimile Reference Manual Download

Page: 188 / 204

Fax via Computer

178

Click the

[

Send Options

]

tab, and then select the

[

Attach a Cover Sheet

]

check

box.

Click

[

Send

]

[

Send & Print

]

Managing Facsimile Functions Using SmartDeviceMonitor for
Admin

You can check information about this machine's fax functions using a computer
and save files on a computer using SmartDeviceMonitor for Admin.

Note

❒

For details about SmartDeviceMonitor for Admin and its installation, see
“Monitoring and Configuring the Printer”, Network Guide.

❒

For details, see Network Guide and SmartDeviceMonitor for Admin Help.

Reference

“Monitoring and Configuring the Printer”, Network Guide

LAN-Fax Operation Messages

This section explains typical operation error messages displayed on the comput-
er when using the LAN-Fax Driver, and solutions to those messages.

Message

Causes and Solutions

Cannot connect to the de-

vice.

Check the network connection.

Check that the power is turned on.

The number of entries in

Destinations exceed the

limits. Up to 300 entries

can be entered.

The number of destinations specified exceeds the maxi-
mum possible. The maximum number of destinations
that can be specified at one time is 300.

"LAN-Fax" has already

been launched. Cannot

launch it again.

The

[

LAN-Fax

]

dialog box is already open. Quit LAN-Fax

once, and then start it up again.

Failed to allocate memo-

ry.

Available memory on the computer is insufficient. Quit
applications currently not in use.

Summary of Contents for Aficio MP 2500













































































































































































































Search results

Summary of Contents for Aficio MP 2500

Reviews:

Related manuals for Aficio MP 2500

Brands by name

Popular brands

Ricoh Aficio MP 2500, Facsimile Reference Manual

Search results

Summary of Contents for Aficio MP 2500

Reviews:

Related manuals for Aficio MP 2500

Brands by name

Popular brands