manualshive.com logo in svg

Ricoh Aficio MP 2500, Facsimile Reference Manual

The Ricoh Aficio MP 2500 is a powerful multifunctional printer that combines printing, copying, and scanning capabilities. With its network manual, users can easily set up and configure the printer to their network. Download the free manual from our website to maximize the functionality of this exceptional product.

Share
Download
background image

Printing Options

137

3

Setting priority trays

With the same size of paper loaded into multiple trays, you can make the ma-
chine use one tray for one function and another tray for another function.
For example, you may load white A4 paper into tray 1 to use when making cop-
ies, and yellow A4 paper into tray 2 to use when printing received faxes. You can
then easily identify for which purpose paper has been output. You can perform
this setting in “Ppr Tray Priority:Fax” in “System Settings”.

Note

❒

When a different size of document from the priority tray is received, the tray
containing the same size of paper as the received document is used. 

Reference

“System Settings”, General Settings Guide

Just size printing

If you enable this function, received documents are printed on the sheet that has
the highest priority.
This function is enabled with User Parameters (switch 05, bit 5) in the Fax Fea-
tures menu.
If the paper tray is not stocked with paper of a suitable size to print a received
document, a message appears on the display prompting you to load paper of the
required size. When you have loaded new paper, press 

[

Exit

]

 to print the document.

Note

❒

After pressing 

[

Exit

]

, procedure varies depending on machine status when the

message occurred.
• If any received documents or reports were being printed automatically, the

printer automatically continues printing from where it left off.

• If any documents or reports were being printed manually, the printer does

not resume printing. Perform the operation from the beginning again.

Reference

“Fax Features”, General Settings Guide

Summary of Contents for Aficio MP 2500













































































































































































































Reviews:

No comments

Related manuals for Aficio MP 2500

Canon PIXMA MG5522 Manual preview
PIXMA MG5522
Brand: Canon Pages: 18
Canon MultiPASS MPC190 Setup Sheet preview
MultiPASS MPC190
Brand: Canon Pages: 8
Xerox Phaser 8400 Service Manual preview
Phaser 8400
Brand: Xerox Pages: 29
Lexmark Monochrome Laser Installation Sheet preview
Monochrome Laser
Brand: Lexmark Pages: 1
Protech Systems MP-1060 User Manual preview
MP-1060
Brand: Protech Systems Pages: 140
Source Technologies ST9612 User Manual preview
ST9612
Brand: Source Technologies Pages: 47
Konica Minolta MS6000 MKII User Manual preview
MS6000 MKII
Brand: Konica Minolta Pages: 102
InfoSight LabeLase 1000Exhaust Operation Manual preview
LabeLase 1000Exhaust
Brand: InfoSight Pages: 38
Epson EMBEDDED UNIT EU Owner'S Manual preview
EMBEDDED UNIT EU
Brand: Epson Pages: 28
Epson ELP-N2550 Paper Jam Manual preview
ELP-N2550
Brand: Epson Pages: 4
Epson EC-4020 Series Quick Start Manual preview
EC-4020 Series
Brand: Epson Pages: 4
Epson EMP 720 Specification Sheet preview
EMP 720
Brand: Epson Pages: 2
Epson ELP-5900 Setup Manual preview
ELP-5900
Brand: Epson Pages: 2
Epson EMP 720 Specifications preview
EMP 720
Brand: Epson Pages: 1
Epson EcoTank ET-1110 Series User Manual preview
EcoTank ET-1110 Series
Brand: Epson Pages: 96
Epson EcoTank ET-M1140 Series User Manual preview
EcoTank ET-M1140 Series
Brand: Epson Pages: 104
Epson EC-C110 User Manual preview
EC-C110
Brand: Epson Pages: 200
Epson EcoTank L15150 User Manual preview
EcoTank L15150
Brand: Epson Pages: 352

Brands by name

Popular brands

Load more brands