Rich electric Invertek CombiPlus, User Manual

Page: 83 / 128

Rich Electric Co. “CombiPlus” User Manual V7.19 Copyright 2009
Page 83
B2-18: MODE1: ACIN Current Lmt
Main Menu>Programming>ENT>General>ENT>Auto transfer Switch>ENT
z
Use constant B2-18 to set the set the specific maximum AC input current in MODE 1. This
value is very important for both battery charger and inverter output power Support.
z
When using constant B2-18, the values determine the actual AC current limit.
B2-19: MODE2: ACIN Current Lmt
Main Menu>Programming>ENT>General>ENT>Auto transfer Switch>ENT
z
Use constant B2-19 to set the set the specific maximum AC input current in MODE 2. This
value is very important for both battery charger and inverter output power Support.
z
When using constant B2-19, the values determine the actual AC current limit.
B2-20: MODE3: ACIN Current Lmt
Main Menu>Programming>ENT>General>ENT>Auto transfer Switch>ENT
z
Use constant B2-20 to set the set the specific maximum AC input current in MODE 3. This
value is very important for both battery charger and inverter output power Support.
z
When using constant B2-20, the values determine the actual AC current limit.
B2-21: MODE4: ACIN Current Lmt
Main Menu>Programming>ENT>General>ENT>Auto transfer Switch>ENT
z
Use constant B2-21 to set the set the specific maximum AC input current in MODE 4. This
value is very important for both battery charger and inverter output power Support.
z
When using constant B2-21, the values determine the actual AC current limit.
B2-29: External ATS Select
Main Menu
＞
Programming
＞
ENT
＞
General
＞
ENT
＞
Auto transfer Switch
＞
ENT
z
Constant B2-29 is used to select to enable or disable the external ATS for the AC power supply
control selection.