Rich electric Invertek CombiPlus, User Manual

Page: 48 / 128

Rich Electric Co. “CombiPlus” User Manual V7.19 Copyright 2009
Page 48
U1-14: CPU ID2
Main Menu>Operation>ENT>Monitor>ENT>
z
Use constant U1-14 to check the software version 2.
U1-15: Solar Charger Status
Main Menu>Operation>ENT>Monitor>ENT>
z
Use constant U1-15 to monitor solar charger status after solar module is connected to
the extension port (Port C).
U1-16: Solar Supply Current
Main Menu>Operation>ENT>Monitor>ENT>
z
Use constant U1-16 to monitor the solar supply current value in unit of 0.1A.
U1-17: Solar Supply Power
Main Menu>Operation>ENT>Monitor>ENT>
z
Use constant U1-17 to monitor the solar supply power value in unit of 1W.
U1-18: Solar Amp-Hours
Main Menu>Operation>ENT>Monitor>ENT>
z
Use constant U1-18 to monitor solar Amp-Hours value in unit of 1AH.
U1-19: Solar Total Amp-Hours
Main Menu>Operation>ENT>Monitor>ENT>
z
Use constant U1-19 to monitor solar total Amp-Hours value in unit of 1AH.
U1-35: External ATS Status
Main Menu
＞
Operation
＞
ENT
＞
Monitor
＞
ENT
＞
z
Use constant U1-35 to monitor the external ATS communication status. If it shows
“COMM Fault”, the communication between ATS and the CombiPlus is not
established.
z
When the AC power supply comes from the Master input of AC grid, this constant
will show “Master Input” and the CombiPlus will switch to Mode 1 automatically.
z
When the AC power supply comes from the Slave input of AC generator, this
constant will show “Slave Input” and the CombiPlus will switch to Mode 2
automatically.