Rich electric Invertek CombiPlus, User Manual

Page: 102 / 128

Rich Electric Co. “CombiPlus” User Manual V7.19 Copyright 2009
Page 102
MENU GROUP Function Parameters Parameter Edit
*** Main Menu ***
Operation
*** Main Menu ***
Initialize
*** Main Menu *** Group B Function B1
Programming General Output Frequency
Group C Function B2 AC IN Low Disconnect AC IN Low Disconnect
Inverter Auto Transfer Switch B2-01 = 180V 18"0"V Entry Accepted
Group D Function B3 AC IN Low connect AC IN Low Disconnect
Charger Parallel System B2-02 = 187V 18"1"V
Group E Function B4 AC IN High Connect
Aux-Relay 2-3 Phase B2-03 = 265V
AC IN Low Disconnect
1"8"1V
Group F Function B1 AC IN High Disconnect
Solar Charger Output Frequency B2-04 = 270V
Group O AC IN Current Limit AC IN Low Disconnect
Operator B2-05 = 16A 1"81V
Group B AC IN Waveform Check
General Active
AC IN Low Disconnect
18"1"V
Ground Relay
Connect
AC IN Frequency Range
45Hz~65Hz MODE 3: Udc Lower ? V
B2-14 = 23.5V
AC IN Dynamic Limit
Normal MODE 3: Lower for ? Sec
B2-15 = 0sec
MODE 2: Udc Lower ? V
B2-10 = 23.5V MODE 3: Udc Higher ?V
B2-16 = 28.8V
MODE 2: Lowre for ? Sec
B2-11 = 0sec MODE 3: HigherfFor ?sec
B2-17 = 0sec
MODE 2: Udc Higher ? V
B2-12 = 28.8V AC IN Low Disconnect
B2-01 = 180V
MODE 2: HigherFor ? Sec
B2-13 = 0sec
Main Menu : Programing - Function B2 - B2-01
DSPL
DSPL
ENTER
DSPL
ENTER
DSPL
ENTER
DSPL
ENTER
DSPL
ENTER
MODE 3
MODE 3
MODE 3
Press or
Key to enable the cursor to go
to the left or the right digit from
the current digit.
MODE 3
MODE 4