Rich electric Invertek CombiPlus, User Manual

Page: 44 / 128

Rich Electric Co. “CombiPlus” User Manual V7.19 Copyright 2009
Page 44
4.5 Main Menu : Programming “Key Selections”
Key Selections……
O2 Group (Key Selections)
O2-01: Key Pressed Beep Select
Main Menu>Programming>ENT>Operator>ENT>Key Selections>ENT>
Setting Function
O2-01=0 When keys are pressed, beep sound will not be heard.
O2-01=1
(Initial setting)
When keys are pressed, beep sound will be heard.
O2-02: Elapsed Time Reset
Main Menu>Programming>ENT>Operator>ENT>Key Selections>ENT>
z
Use constant O2-02 to reset elapsed time.
O2-03: Elapsed Time Select
Main Menu>Programming>ENT>Operator>ENT>Key Selections>ENT>
Setting Function
O2-03=0
(Initial setting)
The elapsed time started to be counted after power is on.
O2-03=1 The elapsed time started to be counted after RUN.
O2-04: CombiPlus® Model
Main Menu>Programming>ENT>Operator>ENT>Key Selections>ENT>
z
This is the model number to be displayed.
O2-06: MODE Key Hold Time
Main Menu>Programming>ENT>Operator>ENT>Key Selections>ENT>
z
Use constant O2-06 to set the time it takes to press MODE key to transfer from one
of four modes to another mode. (This has to be done in STOP mode)
z
Initial setting=5 sec, setting range: 2~10 sec.