Rich electric Invertek CombiPlus, User Manual

Page: 50 / 128

Rich Electric Co. “CombiPlus” User Manual V7.19 Copyright 2009
Page 50
U2-06: AC OUT Current
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-06 to monitor the AC output current value in unit of 0.1A when the
current fault occurs.
U2-07: Battery Voltage
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-07 to monitor the battery voltage value in unit of 0.1V when the
current fault occurs.
U2-08: Battery Ripple Volt
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-08 to monitor the battery ripple voltage in unit of 0.1V when the
current fault occurs.
U2-09: Battery Current
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-09 to monitor the battery current value in unit of 0.1A when the
current fault occurs.
U2-10: Control Mode
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-10 to monitor what the control mode (MODE 1, MODE 2, MODE 3
or MODE 4) is when the current fault occurs.
U2-11: Operation Status
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-11 to monitor 12 digits which account for each operation status
when the current fault occurs. Please see NOTE 1 in Chapter 8.
U2-12: Aux-Relay Status
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-12 to monitor the ON/OFF status of 3 sets of Aux-Relay (RY1, RY2,
RY3) when the current fault occurs. Please see NOTE 2 in Chapter 8.
U2-13: Elapsed Time