Converter - Routing the Motor Power Cables
With cable duct
Without cable duct
B
Area B
C
Area C
1
Cable duct for mains connection lines
2
Shield connection of motor power cable via
clips at least at one point; alternatively, at
the device or on mounting plate at control
cabinet
3
Cable duct for motor power cables
4
Parallel routing of mains connection lines
and motor power cables over a maximum of
300 mm
5
Distance of at least 100 mm or separated by
a grounded distance plate
Fig.11-9:
Routing of Motor Power Cables With Cable
Duct
B
Area B
C
Area C
1
Cable duct for mains connection lines
2
Shield connection of motor power cable via
clips at least at one point; alternatively, at
the device or on mounting plate at control
cabinet
3
Control cabinet outlet of motor power cables
4
Parallel routing of mains connection lines
and motor power cables over a maximum of
300 mm
5
Distance of at least 100 mm or separated by
a grounded distance plate
Fig.11-10:
Routing of Motor Power Cables Without Ca‐
ble Duct
Tab.11-7:
Routing of Cables for Converter
Bosch Rexroth AG
DOK-INDRV*-SYSTEM*****-PR06-EN-P
Rexroth IndraDrive Drive Systems with HMV01/02 HMS01/02, HMD01, HCS02/03
210/309
Arranging the Components in the Control Cabinet
