REX RVF 327 Manual Download Page 34

Page: 34 / 144

RVF 327, 327 S, 330, 330 S
ex no. 1200

Transport, set up, installation

page 34 of 144

Version 1.5

3.9

SAFETY PRECATIONS

3.9.1

Ever present safety risks

(dangers, which are not entirely avoidable, despite built in safety features)

With an excessive amount of effort, one can reach inside the hopper. Do not,
under any circumstances, try to reach inside the hopper when the machine is
operating!

Injuries including the danger of losing fingers and limbs!

Dangers resulting from filling material can affect:

The operator/user

The surrounding area around the position of the Vacuum filling ma-

chine

The vacuum filling machine itself

Therefore one must keep the following away from the Vacuum filling machine:

Children or trainees without supervision

All those not instructed in operation of the machine

All persons not trusted with the operation manual and safety regula-

tions

Persons who pose a possible interference of responsible handling of

the machine through recognizable physical or mental disabilities.

Summary of Contents for RVF 327

















































































































































Search results

Summary of Contents for RVF 327

Reviews:

Related manuals for RVF 327

Brands by name

Popular brands

REX RVF 327, Manual

Search results

Summary of Contents for RVF 327

Reviews:

Related manuals for RVF 327

Brands by name

Popular brands