REX RVF 327 Manual Download Page 141

Page: 141 / 144

RVF 327, 327 S, 330, 330 S

ex no. 1200

Explanations

Version 1.5

page 141 of 144

EXPLANATIONS

8.1

GIVING OVER DECLARATION

The company:

_________________________________

Customer

-Nr.

_________________________________

The

Vacuum filling machine

Type

________

Mach. Nr.____________

he Vacuum filling machine was

At: ________ from:_________________ installed

At: ________ from:_________________ presented

Operation

overtaken.

By the presentation / being put into operation all safety measures and safety precautions according to
the operation manual of the Vacuum filling machine are explained and commented on. The following
persons were shown:

________________________________ ____________________________

_____________________________ __________________________

The machine operation, servicing, and upkeep were declared and commented on through the opera-
tion manual. The following persons were shown:

_________________________________ ____________________________

______________________________ __________________________

In presenting the Vacuum filling machine with products, the following persons were shown and worked
in:

__________________________________ ____________________________

_______________________________ __________________________

The operation manual for the vacuum filling machine

Type:

_________________

Nr.

____________________

Was given over on:

___________________

Protocol executed on:

_________________________

________________________________

___________________________

(Signature /stamp customer authorized)

(Signature of the installer/performer)

Please send back the signed original to the manufacturer /representative

Summary of Contents for RVF 327

















































































































































Search results

Summary of Contents for RVF 327

Reviews:

Related manuals for RVF 327

Brands by name

Popular brands

REX RVF 327, Manual

Search results

Summary of Contents for RVF 327

Reviews:

Related manuals for RVF 327

Brands by name

Popular brands