REX RVF 327 Manual Download Page 40 | Manualshive

Page: 40 / 144

background image

RVF 327, 327 S, 330, 330 S
ex no. 1200

Operation of the vacuum filling
machine

page 40 of 144

Version 1.5

-

Manual operation (single portion):

The Vacuum filling machine produces as long as the knee lever switch is suppressed. When
the knee lever switch is released, the straight filling of the Vacuum filling machine stops im-
mediately. When portioning, the Vacuum filling machine stops after the end of the straight
filled product, except when the portion interruption is activated.

-

Automatic operation (constant portioning):

The Vacuum filling machine begins filling with the first depression of the knee lever switch. In
order to end the straight filling, portioning and the pressure sensor operation, the knee lever
switch must be once again depressed. In order to start again, an additional lever depression
is required. The advantage of this knee lever function is shown, that with larger straight filling
amounts and greater number of portioned pieces, the knee lever switch doesn’t need to re-
main constantly depressed. In the pressure sensor operation a one time depression of the
knee lever switch is sufficient, in order to begin the function.

-

Piece guidelines:

In portioning and the twist off mode it’s also possible to put in a piece number instruction. It
only requires a slight pressure on then knee lever switch to start the Vacuum filling machine.
The machine stops after reaching the selected number of pieces.

-

Activating a second entrance for the operation of a double outlet:

With straight filling it’s possible to double the speed, through activating an entrance to the
clipper outlet (the limit is at 100%, so if 60% is doubled, then only 100% comes out as a final
speed!) This function is only possible with the single portion modus

«
...
38
39
40
41
42
...
»

Summary of Contents for RVF 327

















































































































































Reviews:

No comments

Related manuals for RVF 327

Brand: T-Drill Pages: 75

Brand: Zeiss Pages: 38

Brand: Keithley Pages: 36

Brand: Rain-Flo Irrigation Pages: 16

Brand: NARGESA Pages: 50

Brand: Taylor Pages: 41

Brand: Valcom Pages: 6

Brand: Vaisala Pages: 60

Brand: Vaisala Pages: 146

Brand: Sable Pages: 28

Brand: rbd instruments Pages: 18

Brand: Panasonic Pages: 23

Brand: PMK Pages: 24

Brand: SteelFlex Pages: 13

LED Niova 150-F Pro 150W Bi Color

Brand: Walimex Pro Pages: 56

Brand: Sport-thieme Pages: 20

Brand: Iwatsu Pages: 234

Brand: Rohm Pages: 91

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands