RVF 327, 327 S, 330, 330 S
ex no. 1200
Maintenance
page 122 of 144
Version 1.5
5.2.6
Individual tips for cleaning touch-screen
The surface of the touch screen must be cleaned with a moist, clean, soft cloth with water-
better yet, glass cleaner. The glass cleaner should be sprayed on the cloth rather than direct-
ly on the touch screen surface.
Attention: Filling meat remains which are not removed from the screen can
dry and bring about the disruption of functions.
5.2.7
Individual tips for cleaning the dismantled machine parts
Prior to carrying out the cleaning plan as previously described, dismantle
the filler in this sequence:
-
First press the stop key
-
Main switch (Figure 9, page 41) bring to position "0"
-
When adapters are together, the dismantled them and clean. For this, see the cor-
responding instructions.
-
After removal of the connection cable from the clipper outlet (Figure 8, page 41)
the protective cover must be put on
-
If a filling tube was worked with, loosen hand lock and remove filling tube
-
Open Inspection glass (Figure 3, page 24, Nr. 3)
-
Remove water drain (see Figure 51, page 103, Nr. 1) in the inspection glass
-
Upper portion (see Figure 3, page 24, Nr. 11) unlock and swing off hopper
-
Remove stopper from the hopper
-
Remove feeder
-
Dismantle pressure plate (Figure 47, page 97) with leverage tool
-
valve (Figure 47, page 97) remove individually
-
remove sliding drum (Figure 47, page 97) with leverage tool
-
Remove filling meat remains from the conveyor system, conveyor housing, vacu-
um canal etc.
-
Spray all dismantled parts and Vacuum filling machine with warm water, or spray
with high pressure and steam cleaner
-
Dismantle the ball safety ventilator in the Vacuum holder through pulling and recip-
rocal twisting (Figure 50, page 103, Nr. 2) and give basic cleaning with warm water.
