RVF 327, 327 S, 330, 330 S
ex no. 1200
Machine description
Version 1.5
page 19 of 144
2.
MACHINE DESCRIPTION
2.1
SHORT DESCRIPTION FOR THE CONTINUOUS VACUUM
FILLING MACHINE
With this Vacuum filling machine may only be filled with
-
flexibly workable
-
compressible
-
non burnable
-
non explosive
filling material, portioned and twisted off; even in a frozen condition no lower than -4°C.
The filling material must also have a somewhat lubricating effect.
The construction method of the Vacuum filling machine corresponds with the newest regula-
tions of the EU guidelines. The same applies for the EU-guidelines concerning the handling
of meats and meat products.
The compact machine housing is smooth and flat surfaced, made completely of non-rusting
steel. It stands on vertically adjustable plastic feet and in this way works with relatively little
noise and vibration. The vertically adjustable feet allow for adaptation to an uneven floor and
comfortable cleaning area of the machine through the ground clearance. The completely
even stainless steel surface makes it easier for both cleaning and also preserving the optical-
ly attractive and hygienically flawless condition of the Vacuum filling machine.
The filling hopper, work level, operating switches and lever for the portioning are ergonomic
arranged and guarantee a practically tireless working performance.
The Vacuum filling machine motor is infinitely variable in its RPM speed. The Vacuum filling
machine is operated, controlled, checked and programmed through a clearly arranged, water
tight display. The machine contains, depending upon the equipment, one or more driving
units, which are observed and regulated through a servo technique.
