Response Biomedical RAMP 200 User Manual Download Page 69

Page: 69 / 94

Message

Cause(s)

Solution

Access denied. Try again.

The user does not have the login
permissions necessary to access
selected function.

Confirm correct login details and try
again.

Assay List Size Exceeded.

The list of Assays permitted is full. No
further additions can be made.

NOTE:

The maximum number of

Assay entries allowed is 200.

Delete existing Assays from the Assay
List. For complete instructions, start
the RCU, press

and refer to the

online help.

Assay Locked, Aborting.

The Assay is not permitted or has been
locked. May occur if LQC has failed or if
the Assay is not in the Assay list.

For more information, contact the
Supervisor or a full access RCU user.

Database Almost Full, Backup Data.

Displayed when RAMP

200 is not

connected to a network and either the
patient or LQC result databases have
less than 20 spaces left. This message
continues to appear until the database
is cleared.

Export data to a USB data storage
device and then delete the database.

Default Restore Failed.

The action to restore defaults has
failed.

Try this process again. If the problem
persists, contact Technical Support.

ERROR: Invalid Code. Try Again.

The override code entered is invalid.

Contact Technical Support, and then
enter the override code provided.

ERROR: Numbers Only.

Only numbers are permitted in the
override code field.

Enter the code number provided by
Technical Support.

Invalid Password, Try Again.

The password was incorrectly entered.

Retype the password and try again.

Invalid User, Try Again.

The user is not recognized or has been
entered incorrectly.

Retype user details and try again.

Locked, Contact Supervisor.

The RAMP

200 has been locked by

the RCU.

Contact a full access RCU user to
unlock using the Reader Settings
screen.

Empty Search.

The RAMP

200 cannot find the

requested record. It may have been
deleted or its details may have been
entered incorrectly.

Re-enter the search data and try again.

User Expired, Try Again.

User certification has expired or the
details were entered incorrectly.

Re-enter the operator ID or contact the
Supervisor.

Summary of Contents for RAMP 200































































































Search results

Summary of Contents for RAMP 200

Reviews:

Related manuals for RAMP 200

Brands by name

Popular brands

Response Biomedical RAMP 200, User Manual

Search results

Summary of Contents for RAMP 200

Reviews:

Related manuals for RAMP 200

Brands by name

Popular brands