Response Biomedical RAMP 200, User Manual

Page: 82 / 94

Use this tab to specify the locations for the device, group and time server settings.
You can edit these values either on the CM or in the RCU.
Consult your local IT administrator and the RCU help manual for guidance on how to configure these
settings.
Use this tab to set the current date and time on the system.
You can only edit these values on the CM. They cannot be edited through the RCU unless NTP is enabled.
If you are in Auto Transfer Mode, the RAMP® 200 date and time may be synchronized with the NTP
server.
The date format in the Reader is variable. The date format in the RCU is the same as for other
applications running on that PC.
Periodically check that the clock is correct and has not inadvertently changed.
To configure the values of the Date/Time tab:
1
In the drop-down menu, scroll through times zones and select the time zone offset for your location.
Use the touchscreen keyboard and enter the current time.