ResMed Elisee 350, Clinical Manual

Page: 81 / 110

75/102 Alarms and troubleshooting
NOT013281-8
Tests which apply to both single and double circuit alarms
1. Connect a patient circuit (single or double) fitted with a Maquet test lung to the ventilator and
perform the manual test.
2. Set the mode to ACV, Adult.
3. Set the ventilation parameters as follows:
4. Start ventilation and perform the following actions:
5. Connect a high-pressure oxygen supply and a 2 litre test lung to the ventilator, then set the
following values:
6. Set the V
TE
, Ve, and Pmax alarm thresholds to their respective minimum and maximum
values.
7. Start ventilation and perform the following actions:
8. Disconnect the oxygen and change the ventilation mode to PS.
9. Set the ventilation parameters as follows:
V
T
= 450 mL
max = 28 L/min
PEEP = 0 cm H
2
O Trigger =
NO
F = 15 bpm FiO
2
= 21%
Alarm Action Visual alert
Audible
signal
Time the
alarm takes
to trigger
CIRCUIT OPEN Disconnect the patient circuit expiratory limb Flashing Sounding
2 cycles
Reconnect the patient circuit expiratory limb Steady Off
Press the Alarm Silence button Off Off
MAXI F Adjust the upper alarm threshold to F = 10 bpm Flashing Sounding
4 cycles
Adjust the upper alarm threshold to F = 35 bpm Steady Off
Press the Alarm Silence button Off Off
MAXI P INSPI Adjust the upper alarm threshold to Pmax = 10 cm H
2
O Flashing Sounding
3 cycles
Adjust the upper alarm threshold to Pmax = 60 cm H
2
O Steady Off
Press the Alarm Silence button Off Off
V
T
= 2000 mL
max = 53 L/min
PEEP = 5 cm H
2
O Trigger = 2
F = 10 bpm FiO
2
= 21%
Alarm Action Visual alert
Audible
signal Time the alarm
takes to trigger
MINI FIO
2
Set FiO
2
to 100% Flashing Sounding
2 minutes
Set FiO
2
to 21% Steady Off
Press the Alarm Silence button Off Off
PS = 15 cm H
2
O PEEP = 5 cm H
2
O Ti = 1.2 s
Tapnea = 15 s F = 15 bpm
Pi = 15 cm H
2
O Trigger = 3 FiO
2
= 21%
°
V
°
V