ResMed Elisee 350, Clinical Manual

Page: 82 / 110

76/102 NOT013281-8
10. Start ventilation and perform the following actions:
Tests for double circuit-only alarms
1. Connect a double patient circuit fitted with a Maquet test lung to the ventilator and perform
the manual test.
2. Set the mode to ACV, Adult.
3. Set the ventilation parameters as follows:
4. Start ventilation and perform the following actions:
5. Set the mode to PACV, Adult and perform the following actions:
Alarm Action Visual alert
Audible
signal Time the alarm
takes to trigger
PATIENT APNEA
Trigger 4 inspiratory cycles Steady Off
Tapnea
Wait without triggering further inspiratory phases Flashing Sounding
Press the Alarm Silence button Off Off
O
2
FAULT
Set the FiO
2
to 90% Flashing Sounding
2 minutes
Set the FiO
2
to 21% Steady Off
Press the Alarm Silence button Off Off
V
T
= 500 mL
max = 28 L/min
PEEP = 0 cm H
2
O Trigger =
NO
F = 15 bpm FiO
2
= 21%
Alarm Action Visual alert
Audible
signal Time the alarm
takes to trigger
MINI Vt Adjust the upper alarm threshold to V
TE
= 2000 mL and the
lower alarm threshold to V
TE
= 800 mL
Flashing Sounding
5 cycles
Adjust the lower alarm threshold to V
TE
= 150 mL Steady Off
Press the Alarm Silence button Off Off
MAXI Vt Adjust the upper alarm threshold to V
TE
= 250 mL Flashing Sounding
5 cycles
Adjust the upper alarm threshold to V
TE
= 2000 mL Steady Off
Press the Alarm Silence button Off Off
MAXI V/min
Adjust the lower alarm threshold to e = 0.2 L/min and the
upper threshold to e = 6.5 L/min
Flashing Sounding
Immediately
Adjust the upper alarm threshold to e = 30.0 L/min
Steady Off
Press the Alarm Silence button Off Off
MINI V/min
Adjust the lower alarm threshold to e = 11.0 L/min
Steady Off
Immediately
Adjust the lower alarm threshold to e = 0.2 L/min
Off Off
Press the Alarm Silence button Off Off
Alarm Action Visual alert
Audible
signal Time the alarm
takes to trigger
MAXI LEAKS
Adjust the upper alarm threshold to Leak = 20% then create a
slight leak in the circuit (e.g. by slightly loosening the
expiratory limb of the circuit) Flashing Sounding
6 cycles
Adjust the upper alarm threshold to Leak = 80% and stop the
leak Steady Off
Press the Alarm Silence button Off Off
°
V
°
V
°
V
°
V
°
V
°
V