manualshive.com logo in svg

Renesas 78K0 Series, User Manual, Page: 473 / 659

Share
Download
Renesas 78K0 Series User Manual Download Page 473

CHAPTER  16   SERIAL  INTERFACE  IICA 

User’s Manual  U19780EJ2V0UD 

471

The main processing of the slave operation is explained next. 

Start serial interface IICA and wait until communication is enabled.  When communication is enabled, execute 

communication by using the communication mode flag and ready flag (processing of the stop condition and 

start condition is performed by an interrupt.  Here, check the status by using the flags). 

The transmission operation is repeated until the master no longer returns ACK.  If ACK is not returned from the 

master, communication is completed. 

For reception, the necessary amount of data is received.  When communication is completed, ACK is not 

returned as the next data.  After that, the master generates a stop condition or restart condition.  Exit from the 

communication status occurs in this way. 

 

Figure 16-30.  Slave Operation Flowchart (1) 

 

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No

No

No

No

No

No

WREL0 = 1

ACKD0 = 1?

No

Yes

No

Yes

No

START

Communication

mode flag = 1?

Communication

mode flag = 1?

Communication

direction flag = 1?

Ready flag = 

1?

Communication

direction flag = 0?

Reading IICA

Clearing ready flag

Clearing ready flag

Communication

direction flag = 1?

Clearing communication

mode flag

WREL0 = 1

Writing IICA

SVA0 

←

 XXH

Sets a local address.

IICWL, IICWH 

←

 XXH

Selects a transfer clock.

IICAF0 

←

 0XH

Setting IICRSV

Sets a start condition.

Starts 
transmission.

Starts 
reception.

Communication

mode flag = 1?

Ready flag = 

1?

Setting port

Setting port

Communication processing

Initial setting

Setting of the port used alternatively as the pin to be used.
First, set the port to input mode and the output latch to 0 (see 

16.3 (7)  Port mode register 6 (PM6)

).

Set the port from input mode to output mode and enable the output of the I

2

C bus

(see 

16.3 (7)  Port mode register 6 (PM6)

).

IICACTL0 

←

 0XX011XXB

ACKE0 = WTIM0 = 10

IICACTL0 

←

 1XX011XXB

SPIE0 = 0, IICE0 = 1

 

Remark

  Conform to the specifications of the product that is in communication, regarding the transmission and 

reception formats. 

Summary of Contents for 78K0 Series




















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments