Operator’s Guide
Display Controls
Figure 4. Display Controls
The Display Controls include the LCD display, supported by buttons and
knobs that allow you to navigate through and make selections within the
Views and Menus that appear on the display. The Views and Menus allow
you to keep track of how your mixer is set up, View characteristics of
input signals, make changes to your mixer’s setup, and apply effects to
audio (also see “Introducing Views and Menus” on page 21).
System Menu Button
Pressing this button brings up the System Menus on the LCD display.
System Menus are for making system-wide changes and for Viewing
certain kinds of system information (also see “Introducing Views and
Menus” on page 21). The Menu button is a toggle switch; pressing it
again exits the System Menus.
Soft Buttons
These four buttons are used for making selections on Views and Menus,
as shown in the example below. These are named “soft” buttons because
their functions change according which View or Menu is displayed. The
position of each corresponds to one of the virtual buttons (soft keys) in
the display.
Soft Knobs
The two rotary soft knobs (upper and lower) are used to change
parameters in many of the display menus, as shown in the example
below. These are named “soft” knobs because their functions change
according which menu is displayed.
Control Descriptions
Page 11
