Operator’s Guide
Memory Save/Recall
The Gray|328 allows you to take up to 200 snapshots of the mixer’s
settings, and recall them. At each memory save, the current control panel
settings are stored in a register. During recall, the settings stored in a
register are applied to the control panel.
Note
You can only Save/Recall a register when you are not in any menu
(Select, System Menu, or Monitor Mode).
Because flash memory is used, setups saved to memory are not lost if
power is removed.
What is stored during a Memory Save
During a Memory Save, the following settings are stored for later recall.
•
Input Assignment
•
EQ
•
Phase
•
Mute
•
Headphone Output
Routing
•
Digital Reference Level
•
Delay
•
Input Level Trim
•
Output Assignment
•
Monitor Mode
•
Solo
•
Headphone Level
•
Sample Rate
•
Panel LED Level
•
Clean Feed
•
Fader levels
•
Pan Pot positions
•
ESAM II Crosspoints
•
ESAM II Controls
Figure 101. Memory Save Contents
Note
Monitor level, Master Fader setting, and Reference source are not stored
during a memory save.
Memory Save/Recall
Page 83
