Renegade Labs Gray|328
Figure 99. Monitor Mode: User 2 Mode, Detail #2
2.
To switch to another set of monitor input channels, rotate the Lower
Soft Knob, labeled “SELECT CHANNELS.” As you rotate the knob,
the display will highlight the next set of channels. The Multi-Function
Keypad buttons will follow the display. Lighting the LEDs to indicate
active monitor matrix selections.
Figure 100. Monitor Mode: User 2 Mode, Channels 5 and
6
3.
After you select the other channels, use the Multi-Function buttons to
route the program outputs to monitor outputs as you wish.
4.
To accept the changes, toggle the monitor MODE button off. The
display returns to the previous view.
5.
Or, press RESET to reset the mode to its default state (8-channel
routing).
Page 82
Monitoring Control
