Operator’s Guide
Note
The soft buttons “SELECT” and “CHANGE” only function with an optional
output module installed that have configuration settings possible.
To configure the Output Functionality:
1.
Press the MENU button to call up the System Menu.
2.
Press MORE 3 times to display the fourth level of the System Menu.
3.
Press the OUTPUT soft button to display the Output Menu.
4.
Use the upper soft-knob, OUTPUT SELECT, to select the outputs:
•
DIGITAL OUT
are the standard digital outputs. On some
systems these outputs are designated
PGM AES OUT
.
•
ANALOG OUT
are the standard analog outputs. On some
systems these outputs are designated
ANALOG MONITOR
OUT
.
•
OPTIONAL OUT
can be configured as either analog or digital
outputs.
5.
Use the lower soft knob, FUNCTION SELECT, to select the function:
•
PROGRAM
feeds the output with the program bus.
•
MONITOR
feeds the output with the monitor matrix output.
•
METER
feeds the output with the meter output.
Note
The METER output follows inputs to the monitor matrix.
6.
Press the EXIT soft button to exit the Output Menu.
OR
Press the CANCEL soft button to abort the operation.
Note
Output function settings are not saved in the standard memory registers
however, they are saved in non-volatile memory and will survive power
cycles.
Optional output module indication:
The Output Function Menu will indicate if a digital AES, analog, or SD/HD
SDI embedder optional output module is installed in the mixer.
Figure 41. Output Function Menu, AES Output installed
System Adjustments and Information Display
Page 41
