manualshive.com logo in svg

RELM GPH-CMD, Programming Instruction Manual, Page: 55 / 61

Share
Download
RELM GPH-CMD Programming Instruction Manual Download Page 55

RELM Wireless Corporation 

51

 

ctcss code guard values

The CTCSS Code Guard system may be set for any frequency in the 

range of 67 to 255.9 Hz.  However, since most systems adhere to the 

Electronic Industry Association (EIA) standards, tones should be selected 

from the following EIA list.  In order to insure optimum performance, tone 

selection for use on the same radio frequency (RF) channel or adjacent 

channels in the same coverage area should be made from one of the 

Groups A, B, or C to the maximum degree possible.  

Group A

Group B

Group C

    67.0 (XZ)  *151.4 (5Z) 71.9 (XA)

  146.2 (4B)

  74.4

    77.0 (XB)    162.2 (5B)     82.5 (YZ)   156.7 (5A)

  79.7

    88.5 (YB)    173.8 (6A)     94.8 (ZA)   167.9 (6Z)   85.4 (YA)
*100.0 (1Z)

   186.2 (7Z)   103.5 (1A) *179.9 (6B)

  91.5 (ZZ)

  107.2 (1B)    203.5 (M1)   110.9 (2X)   192.8 (7A)
  114.8 (2A)    218.1 (M3) *118.8 (2B)    210.7 (M2)
  123.0 (3Z)

   233.6

  127.3 (3A)   225.7 (M4)

  131.8 (3B)

   250.3

  136.5 (4Z)

  241.8

  141.3 (4A)

* 50/60 Hz power distribution systems could cause falsing.

The assignments in a given area shall be made from within one of the 

Groups: A, B, or C.

Summary of Contents for GPH-CMD






























































Reviews:

No comments