RELM GPH-CMD Programming Instruction Manual Download Page 32

Page: 32 / 61

BK Radio Programming Manual

option 1-8: silent mode

PRG TX RX SCN D CMND



home channel
T32 N4 G7

PRG TX RX SCN D CMND



1-12345678

GBL OPTIONS

When Option 8 is enabled (flashing), all

beeps, tones, and alerts from the radio’s

speaker are silenced. Only normal audio

communication between radio users will be

heard.

store global options settings

Once each option is set as desired, you can store the changes, discard

the changes, or disable all displayed options.
Press the [CLR] key to disable all displayed options (steady).
Press the [ENT] key to store new displayed options settings into

memory and advance to the next field.
Press the [FCN] key to advance to the next field without saving

changes.

global options group two

option 2-1: reserved for future options

options 2-2 & 3: busy channel operation

PRG TX RX SCN D CMND



home channel
T32 N4 G7

PRG TX RX SCN D CMND



2-12345678

GBL OPTIONS

Options two and three are used to set Busy

Channel operation. There are three types of

busy channel operation available.

busy channel modes include:

busy channel Indicator

- The yellow LED illuminates when a signal

is received on the channel selected, with or without the programmed

receive Code Guard setting.

busy channel lockout

- The yellow LED illuminates and the

transmitter PTT is disabled when a signal is received without the

programmed receive Code Guard setting.

busy channel override

- This option is similar to Busy Channel

Lockout except the transmitter PTT can be activated by rotating the

Squelch knob clockwise off the Code Guard detent.

To set Busy Channel operation, use the following chart:

Summary of Contents for GPH-CMD






























































Search results

Summary of Contents for GPH-CMD

Reviews:

RELM GPH-CMD, Programming Instruction Manual, Page: 32 / 61

Search results

Summary of Contents for GPH-CMD

Reviews: