RELM GPH-CMD, Programming Instruction Manual, Page: 11 / 61

RELM Wireless Corporation 7
Priority 2 channel
After the Priority 1 Channel is set, the display will indicate ‘PRG PR2.’
The Priority 2 Channel can be programmed as a fixed channel, tied to
the Channel Selector knob, or programmed OFF.
The PR2 channel cannot be altered during normal radio operation.
PR 2 OFF
PRG
Press the [PRI] key to cycle through the
priority channel options, or enter a fixed
priority channel using the number keys.
Setting the channel to ON ties the PR2
channel to the Channel Selector knob.
Pressing [CLR] or the [0] key turns the PR2 channel OFF.
Press the [ENT] key to store the new priority channel and advance to
the next field.
channel 0 group one functions
1 -- 12345
PRG
After the Priority 2 Channel is set the display
will show ‘PRG 1-12345.’ This is a group of
five individual functions that can be enabled
or disabled.
1 -- 12345
PRG
When a function is enabled, the
corresponding number in the display will
flash. When the function is disabled the
number is steady. If you wish to change the
function from enable to disable or vice
versa, press the number key corresponding
to that function.
EXAMPLE: If function 4 (Priority 1 Lock) is disabled, the 4 in the
display will not be flashing. If the [4] key is pressed, the 4 in the display
will flash, signifying that Priority 1 Lock is enabled. A subsequent press
of the [4] key will disable Priority 1 Lock.
option 1-1: battery saver Inhibit
1 -- 12345
PRG
When function 1 is enabled (flashing) the
battery saver is turned off. The battery saver
should be turned off only for getting proper
voltage readings during service or for
systems requiring fast squelch attack time.
NOTE: BK Radio current drain and battery life specifications are based
on performance with the battery saver on.