manualshive.com logo in svg

RELM GPH-CMD, Programming Instruction Manual, Page: 37 / 61

Share
Download
RELM GPH-CMD Programming Instruction Manual Download Page 37

RELM Wireless Corporation 

33

 

scan delay 

PRG    TX    RX    SCN    D        CMND   

home channel
T32    N4    G7

PRG TX RX SCN D      CMND   

 2.5 SEC

SCAN DELAY

This field is the ‘SCAN DELAY’ time.

Press the [PRI] key to increase the scan 

delay time by .5 seconds, up to 7.5 seconds. 

Press the [PRI] key again to change the time 

from 7.5 seconds to 0.

Press the [CLR] key to reset the scan delay time to 0.
Press the [ENT] key to store the changed setting and advance to the 

next field.
Press the [FCN] key to advance to the next field if no change is needed.

busy channel operation

PRG    TX    RX    SCN    D        CMND   

home channel
T32    N4    G7

PRG TX RX SCN D      CMND   

LOCKOUT

BUSY CHANNEL

This step applies to DPH-CMD only.

 

Refer to “Option Group 2 - 2/3” for GPH-CMD.

There are three types of busy channel 

operation available.

busy channel modes include:

Busy Channel Indicator

 - The yellow LED illuminates when a signal 

is received on the channel selected, with or without the programmed 

receive Channel Guard setting.

Busy Channel Lockout

 - The yellow LED illuminates and the transmitter 

PTT is disabled when a signal is received without the programmed 

receive Channel Guard setting.

Busy Channel Override

 - This option is similar to Busy Channel Lockout 

except the transmitter PTT can be activated by rotating the Squelch 

knob clockwise off the Channel Guard detent.

Press the [PRI] key to cycle through the available settings. 
Press the [ENT] key to store the changed setting and advance to the 

next field.
Press the [FCN] key to advance to the next field if no change is needed.

anI/dtmf operation

PRG    TX    RX    SCN    D        CMND   

home channel
T32    N4    G7

PRG TX RX SCN D      CMND   

DTMF ONLY

ANI/DTMF

This step applies to DPH-CMD only.

 

Refer to “Option Group 2 - 4/5” for GPH-

CMD.

Summary of Contents for GPH-CMD






























































Reviews:

No comments