RELM GPH-CMD, Programming Instruction Manual, Page: 30 / 61

26 BK Radio Programming Manual
cmd global Parameter options (grP 00)
From the “CH XX” position, press and hold the [#] to get the “GRP XX”
prompt and press “0”. The display will show “GRP 00”.
Use the [FCN] key to cycle through the programmable functions.
Keypad editing Password
PRG TX RX SCN D CMND


home channel
T32 N4 G7
PRG TX RX SCN D CMND

EDIT- 000000
PASSWORD
The current keypad programming
‘PASSWORD’ is displayed.
If no change is needed, press the [FCN] key
to advance to the next field.
A new password can be entered by pressing number keys.
Press [ENT] to store the new password and advance to the next field.
global option groups 1 and 2
note: global option groups one and two are for gPh-cmd
radios only. on dPh-cmd digital radios, these items are accessed
individually by pressing the [fcn] button.
PRG TX RX SCN D CMND


home channel
T32 N4 G7
PRG TX RX SCN D CMND

1-12345678
GBL OPTIONS
These are groups of eight individual options that
can be enabled or disabled.
When an Option is enabled, the corresponding
number in the display will flash. When the
Option is disabled, the number is steady. If you wish to change the
Option from enabled to disabled or vice versa, press the number key
corresponding to that Option.
global options group one
option 1-1: battery saver Inhibit
PRG TX RX SCN D CMND


home channel
T32 N4 G7
PRG TX RX SCN D CMND

1-12345678
GBL OPTIONS
When Option 1 is enabled (flashing), the
Battery Saver is turned off. The Battery
Saver should be turned off only for getting
proper voltage readings during service or for
systems requiring fast squelch attack time.
NOTE: BK Radio current drain and battery life specifications are
based on performance with the battery saver on.