manualshive.com logo in svg

RELM GPH-CMD, Programming Instruction Manual, Page: 35 / 61

Share
Download
RELM GPH-CMD Programming Instruction Manual Download Page 35

RELM Wireless Corporation 

31

 

Priority 2 channel

PRG    TX    RX    SCN    D        CMND   

home channel
T32    N4    G7

PRG TX RX SCN D      CMND   

CHANNEL XX

PRI-2 CHAN

This field is the ‘Priority 2 Channel’. Any one 

of the 500 channels in the radios can be 

designated as the Priority 2 channel, or 

PRI-2 can be tied to the Channel Selector 

knob, or programmed OFF.

The PRI-2 channel cannot be altered during normal radio operation.

Press the [PRI] key to cycle through the priority channel options.

Setting the channel to MAIN ties the PRI-2 channel to the Channel 

Selector knob. 

Press the [ENT] key to store the new priority channel and advance to the 

next field.

Priority 2 group

PRG    TX    RX    SCN    D        CMND   

home channel
T32    N4    G7

PRG TX RX SCN D      CMND   

GROUP  XX

PRI-2 GROUP

If the Priority 2 channel has been 

programmed as one of the 500 channels in 

the radio, the group where the channel 

resides must be designated. If PRI-2 has 

been tied to the Channel Selector knob (set 

to MAIN), or programmed OFF, the Priority Group field is skipped.
Press the [PRI] key to cycle through the priority group options, or press 

number keys to enter a group.

Press the [ENT] key to store the new priority group and advance to the 

next field.

transmit on Priority 1

PRG    TX    RX    SCN    D        CMND   

home channel
T32    N4    G7

PRG TX RX SCN D      CMND   

ON

TX ON PRI-1

This step applies to DPH-CMD only.

 

Refer to “Option Group 1 - 5” for GPH-CMD.
When TX ON PRI-1 is ON, transmissions will 

occur on PRI-1 (if PRI-1 isn’t programmed 

OFF) when operating in Single or Dual Priority Scan Mode. To simulate 

Old-Style Priority Mode C, Transmit on Priority 1 must be enabled.
Press [PRI] to toggle the option on or off.
Press [ENT] to store the setting and advance to the next field.

Summary of Contents for GPH-CMD






























































Reviews:

No comments