RELM GPH-CMD, Programming Instruction Manual, Page: 29 / 61

RELM Wireless Corporation 25
group options group one: 1-12345678
option 1-8: group scan list
PRG TX RX SCN D CMND


home channel
T32 N4 G7
PRG TX RX SCN D CMND

1-12345678
GRP OPTIONS
When an option is enabled, the
corresponding number in the display will
flash. When the option is disabled the
number is steady. If you wish to change the
option from enabled to disabled or vice versa, press the number key
corresponding to that option.
Option numbers 1-7 are inactive.
Option 8 adds the group being programmed to the Group Scan List
When Option 8 is enabled (flashing) the current group will be scanned
when the radio is operating in Group Scan Mode.
Press the [ENT] key to store the group options settings into memory
and advance to the next field.
group label
PRG TX RX SCN D CMND


home channel
T32 N4 G7
PRG TX RX SCN D CMND

LABEL 1
Group Label
Each Channel Group can have a label of up
to twelve characters or spaces.
The characters can include 0-9, A-Z, –, -, .,
*, +, <, >, /, \, |, $, %, h, or blank.
If no change is needed, press the [FCN] key to go back to the starting
point for Channel 0 settings.
changing the group label
Labels are edited from left to right. Pressing the [PRI] key moves
the cursor to the next character. Pressing and holding the [PRI] key
backspaces to the previous character.
The number keys 2 – 9 allow for entry of the letters printed on the
respective keys. For example, the first press of the [2] key enters the
letter A, the second press enters a B, the third press enters a C, and
the fourth press enters a 2. Keys 0 and 1 can be used to enter the
following characters:
0: 0, space, –, _, ., *, +
1: 1, <, >, /, \, |, $, %, h
Press the [ENT] key to store changes and go back to the starting point
for Channel 0 settings.