RELM GPH-CMD, Programming Instruction Manual, Page: 46 / 61

42 BK Radio Programming Manual
CMD Specific Programmable Items
global Priority channels considerations
Priority channels in CMD radios operate on a “radio wide” basis.
When PRI is on the assigned priority zone and channel are monitored
regardless of the currently operating zone.
user selectable code guard considerations
PRG TX RX SCN D CMND


home channel
T32 N4 G7
PRG TX RX SCN D CMND

000.0
TX GUARD
To access the User Selectable TX Code
Guard list in a Command radio the transmit
Code Guard must be programmed to 000.0.
user selectable nac and talkgroup considerations
PRG TX RX SCN D CMND


home channel
T32 N4 G7
PRG TX RX SCN D CMND

UNAC EN
TX NAC
To access the User Selectable TX NAC list in
a Command radio press and hold the [8
TUV
]
key, while in the TX NAC screen, until “UNAC
EN” appears in the display.
To disable the User Selectable NAC and assign a channel specific
NAC, press and hold the [8
TUV
] key until “000.0” is displayed.
PRG TX RX SCN D CMND


home channel
T32 N4 G7
PRG TX RX SCN D CMND

UTGID EN
TALK GRP ID
To access the User Selectable Talk Group
ID list in a Command radio press and hold
the [8
TUV
] key, while in the Talk Group ID
screen, until “UTGID EN” appears in the
display.
To disable the User Selectable Talk Group and assign a channel
specific ID, press and hold the [8
TUV
] key until “00000” is displayed.
Programming the Picklists
Command radio Code Guard, NAC and Talkgroup picklist entries can
be programmed without the need to enter the radio programming
mode. This function must be enabled with the radio PC programming
editor. Refer to the editor for details.