RELM GPH-CMD, Programming Instruction Manual, Page: 25 / 61

RELM Wireless Corporation 21
review channel settings
After the channel label is set, the display will return to the Channel 1
starting point. If you wish to review the Channel 1 settings, subsequent
pressing of the [FCN] or [ENT] key will show each value and then
return to the Channel 1 starting point.
Program another channel
ch 01
PRG
At the starting point for Channel 1, the
display will show ‘PRG CH 01’. Press the
number keys for another channel number to
gain access to the frequencies, etc. for that
channel. Each channel is then programmed using the same steps
described for Channel
exit Programming mode
A B C
CG
-
SQ
OFF
-
VOL
3
5
4
16
2 1
14
15
13
12
8
6
7
9 10
11
Rotate the OFF-VOL knob counterclockwise
to the OFF position.
The radio will be in normal Operating Mode
the next time it is turned on.