RELM GPH-CMD Programming Instruction Manual Download Page 31

Page: 31 / 61

RELM Wireless Corporation

option 1-2: reserved for future options

option 1-3: transmit on Priority 1

PRG TX RX SCN D CMND



home channel
T32 N4 G7

PRG TX RX SCN D CMND



1-12345678

GBL OPTIONS

When Option 3 is enabled (flashing),

transmissions will occur on PR1 (if PR1 isn’t

programmed OFF) when operating in Single

or Dual Priority Scan Mode.

option 1-4: Priority 1 lock

PRG TX RX SCN D CMND



home channel
T32 N4 G7

PRG TX RX SCN D CMND



1-12345678

GBL OPTIONS

When Option 4 is enabled (flashing) the

user will not be able to change the

designation of the Priority 1 Channel by

selecting a channel and pressing the [PRI] key.

When Option 4 is disabled (steady) the user will be able to change the

channel that is designated as Priority 1 Channel.

option 1-5: scan list lock

PRG TX RX SCN D CMND



home channel
T32 N4 G7

PRG TX RX SCN D CMND



1-12345678

GBL OPTIONS

When Option 5 is enabled (flashing), the

user will not be able to use the [ENT] and

[CLR] keys to add channels to and delete

channels from the Scan List.

When disabled (steady), the user can alter the Scan List using the

[ENT] and [CLR] keys.

option 1-6: backlight on display change

PRG TX RX SCN D CMND



home channel
T32 N4 G7

PRG TX RX SCN D CMND



1-12345678

GBL OPTIONS

When Option 6 is enabled (flashing), the

display backlight will illuminate each time

the display receives input. This includes

displayed changes in the selected channel

or scan channel, and the PR, TX, and SCN

annunciators. The display will not illuminate if Backlight Duration is set

to LITE OFF. See “Backlight Duration”.

option 1-7: backlight on Key Press

PRG TX RX SCN D CMND



home channel
T32 N4 G7

PRG TX RX SCN D CMND



1-12345678

GBL OPTIONS

When 0ption 7 is enabled (flashing), the

display backlight will illuminate each time a

key is pressed, even if pressing the key has

no other effect. The display will not

illuminate if backlight duration is set to LITE OFF. See “Backlight

Duration”.

Summary of Contents for GPH-CMD






























































Search results

Summary of Contents for GPH-CMD

Reviews:

RELM GPH-CMD, Programming Instruction Manual, Page: 31 / 61

Search results

Summary of Contents for GPH-CMD

Reviews: