Manual - TC.P Quadro
TopControl application
2016-08-05
240/330
V04.52
6
Filtering and grouping (continued)
4
Variable activation,
button group
The activation status of the variables can be changed.
Two states are possible, see Table 142, page 238 description of the parame-
ter list:
Green
1
Variable is active
Can be saved in the TopCon
Grey
1
Variable is inactive
Cannot be saved in the TopCon
Meaning of the buttons:
<Toggle state> The state is changed. Condition:
Lines in the parameter list are selected (blue background).
<All on>
All variables in the parameter list are activated (green).
<All off>
All variables in the parameter list are deactivated (grey).
5
x/y vars,
read-only indication
x
≙
Number of filtered and indicated variables (parameter list).
y
≙
Total number of variables in the gridfile.
6
Check boxes
Effects if the following check boxes are selected:
show verify
Numerical value or physical value is indicated in the parame-
ter list compared with the values saved in the TopCon.
The values saved in the TopCon are indicated in brackets.
phys. values
The physical value and unit are indicated in the parameter
list in the “value” column.
cont. read
Continuous reading of variables from the TopCon memory,
as soon as the “Read” button is clicked.
See Table 141, page 236.
Table 143 Filtering and grouping
– description of the options.
1
A deactivated variable can be switched between active and inactive by double-
clicking using the right mouse button.
