Regal 42 Fly-Grande Coupe, Owner'S Manual

Page: 311 / 386

5
Flybridge Overview
TYPICAL BRIDGE SEATING OPERATION
Th e bridge helm seat is adjustable fore and aft through a
lever rod component located under the front of the seat.
Simply push the rod to the right and while holding it in
position push the seat back to the desired location and
then release the rod. it will lock the seat in the nearest
track detent.
HELM SEAT
TRACK
ADJUSTMENT ROD
The bridge passenger seat is adjustable fore and aft
through an adjustment rod located at the side of the seat.
Simply pull the knob and while holding it in position
push the seat to the desired location and then release
the rod. it will lock the seat in the nearest track detent.
Note the position of the seat hinge. To travel from the
upright to the lay down position pull up on the seat to
engage the seat in the lay down detent section of the
hinge.
Also, there is a center detent for a tilted seat position.
FORE & AFT
ADJUSTER
LAYDOWN DETENT
UPRIGHT DETENT