Regal 42 Fly-Grande Coupe, Owner'S Manual

Page: 288 / 386

42
Chapter 8
PLUMBING CONNECTORS
Plumbing connections to the red and blue fresh water
lines require special instructions when they are to be
removed or replaced. Be sure to turn off the water for
that circuit at the manifold before starting any plumbing
repairs.
1. To remove a tee, 90 degree, or straight connector fi tting
fi rst remove the cap on the end of the fi tting by using a
slotted screwdriver. Insert the screwdriver in the cap slot
and turn 90 degrees. Cap will release from the fi tting.
To reinstall a plumbing connection to a water line make
sure the line is cut off square and the end is smooth. Th is
will aid in ensuring a leakproof connection.
1. Install the cap on the supply line. You may need to use a
slotted screwdriver to remove the cap from a new fi tting.
2. Simply push the fi tting on to the supply line until
pressure is felt. Th is ensures it is completely in the fi tting.
3. Push the cap on the collar until it snaps in place. Turn
on the water pressure and check for leaks.
Note: With the connector in place, a movement between
the line and connector is normal.
2. Push the connector and collar together. Hold the
collar next to the connector with your fi nger. Pull and
the connector/collar will release itself from the water line.
Cap
Fitting
Hold End Of Fitting
With Fingers And Pull
Connector Free Of
Supply Line
Slotted
Screwdriver