Regal 42 Fly-Grande Coupe, Owner'S Manual

Page: 161 / 386

2
Chapter 5
ENGINE BREAK-IN: ALL MODELS
Diesel propulsion systems require a pre-determined
“break in” period. During this time the engine should
not be run at a full load condition for extended periods.
Various engine load and speed conditions assist the in-
ternal engine parts such as bearings, valves and piston
rings to “seat” properly which will help ensure a longer
engine life. See operator’s manual for further informa-
tion.
During the “break in” period it is necessary to check
the engine oil more frequently since it is normal that
the engine will use more oil. If engine oil is required be
sure to check the engine manual for proper grade and
viscosity.
Check the maintenance schedule in your engine own-
er’s manual and contact your Regal yacht dealer to set
up the fi rst maintenance inspection. Normally the en-
gine oil, fi lters, and drive oil inspections and mainte-
nance are performed during this inspection along with
other items. Never exceed a 12 month period between
oil changes especially with diesel power since sulfur
tends to enter the lubrication system through the fuel
combustion process over a period of time.
OIL CHANGES (ENGINE & DRIVE)
Be sure to read the owner’s manual regarding engine oil
change recommendations along with IPS stern drive oil.
Be sure to follow the Volvo recommended oil type and
viscosity. Th
e engine oil change is an important factor
in obtaining engine longevity since impurities enter the
crankcase through the combustion process and build
up in the engine oil.
Be sure to check the drive oil on a periodic basis and
change it using the recommended type per the Volvo
engine owner’s manual.