Regal 42 Fly-Grande Coupe, Owner'S Manual

Page: 95 / 386

42
Chapter 4
POSSIBLE PROBLEMS/SOLUTIONS
1. Aft er the dockside cord is hooked up
to the marina dock power center and the
AC ship’s panel main breaker for shore-
power 1 or 2 is activated no voltage is
shown on the main panel AC volt meter.
Check the breaker on the marina dock power center to
ensure it is activated.
Check the ELCI 3 pole single throw breaker/voltage
sensing device. Th e “power” icon should show green.
If a leakage fault exists a “red” icon will light indicating
the breaker is “tripped”. Use the test button to reset the
breaker.
2. Th e marina dock power center lacks a 50 amp plug.
Call the dockmaster or marina personnel. An adapter
cord may be available. NEVER IMPROVISE ANY
TYPE OF CORD OR POWER INLET CHANGES!
Also, an adapter cord may be purchased that delivers
twin 30 amp service and adapts to the 50 amp yacht
dockside cord. Adapters can be found at retail boating
outlets.
3.
Th e cord reel switch fails to retrieve the dockside
cord.
Check the cord reel breaker located on the battery man-
agement panel.
TYPICAL TRANSOM VIEW- CORD REEL SYSTEM