Regal 42 Fly-Grande Coupe, Owner'S Manual

Page: 324 / 386

11
Troubleshooting
SIRIUS MARINE WEATHER
LED STATUS
The LED at the connector panel provides valuable
troubleshooting information on the status of your
weather system.
Th e LED blinks green while the system is operating
normally. If the unit detects a problem, the LED blinks
amber to indicate a warning or red to indicate an error.
Th
e pattern ot the LED blink is a code representing the
nature of the problem. For multiple warnings/errors
the codes are given in sequence with a 1.5 second pause
between the indications.
It is normal during the fi rst minute of initial power that
the SR100 status LED shows no activity and remains
off . During the second minute the status LED will start
to fl ash the amber or red fault strings. Typically, during
normal operation, a fl ashing green LED will occur
within 90 seconds of initial power. If there is no LED
indication of any sort displayed aft er 90 seconds you
should check the circuit breaker.
A blinking red LED indicates an internal fault condition
and a marine electronics technician should be contacted.
Th e following table shows the LED status codes and their
meanings:
LED
COLOR
LED
PATTERN
DESCRIPTION
GREEN BLINKING NORMAL
OPERATION
AMBER 1 SEC ON
1 SEC OFF
ANTENNA
UNHOOKED
AMBER 1 SEC ON
1 SEC OFF
1SEC ON
1SEC OFF
SEATALK
CABLE
UNHOOKED
RED BLINKING I N T E R N A L
FAULT