45
9. Display and programming keys
a) Overview
The display shown here appears when activating the remote control.
Ill. 3
1 Button "Mode" for selecting individual menu items
2 Display of the model name - max. 4 characters (alphanumerical, e.g. MDL1)
3 Display of the selected modulation type
4 Rocker "+/-" for changing the setting values
5 Display of the transmitter's current operating voltage
6 Display of the selected memory number
7 Select button for selecting submenu items
8 Button "Throttle Cut" for cutting off the drive engine
b) Explanation of the display in operation (not for programming)
Model name (ill. 3, pos. 2) and model number (ill. 3, pos. 6)
The remote control can be programmed for up to 6 flight models. This way, you do not have to newly program the
remote control when you want to fly a different model. When turning the remote control on, the name and number of
the currently set model appears.
Before you start flying, make sure the correct model is set on the remote control. If you use the values of a different
model, the model you are currently using might crash.
You should note down which flight model you have programmed with which name and number in the remote control.
Stick this note on the back of your remote control, for example.
Summary of Contents for 20 55 15
Page 134: ...134 ...
Page 135: ...135 ...
