R
EVISED
2018-09-21
P
REFACE
D
RAWING
N
O
. LP0991-G
D
ISCLAIMER
N-Tron
®
Series NT24K
®
Software Manual
- v -
Preface
Disclaimer
Portions of this document are intended solely as an outline of methodologies to be followed during the
maintenance and operation of the
NT24k
®
equipment. It is not intended as a step-by-step guide or a
complete set of all procedures necessary and sufficient to complete all operations.
While every effort has been made to ensure that this document is complete and accurate at the time of release, the
information that it contains is subject to change. Red Lion Controls
®
is not responsible for any additions to or
alterations of the original document. Industrial networks vary widely in their configurations, topologies, and traffic
conditions. This document is intended as a general guide only. It has not been tested for all possible applications,
and it may not be complete or accurate for some situations.
Users of this document are urged to heed warnings and cautions used throughout the document.
Purpose
This manual gives specific information on how to apply and use the functions on the Red Lion N-Tron
®
Series
NT24k switches.
Audience
The manual is intended for use by personnel who are responsible for operating and maintaining network
equipment; consequently, it assumes a basic working knowledge of general switch functions, the Internet Protocol
(IP) and Simple Network Management Protocol (SNMP).
Compliance
Statements
&
User
Information
FCC
Compliance
Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment uses and can generate radiate radio frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference to radio communications, in
which case the user will be required to correct the interference at their own expense.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.