R
EVISED
2018-09-21
N-R
ING
™
D
RAWING
N
O
. LP0991-G
C
ONFIGURATION
/P
ORT
S
ETS
N-Tron
®
Series NT24K
®
Software Manual
2-65
6. An NT24k switch can only participate in one N-Ring unless in Multi Member mode.
7. Since VLANs are implemented for security reasons as well as traffic flow, N-Ring only makes minimal
VLAN changes. It is up to the administrator to ensure that VLANs are configured correctly on the N-Ring
manager and all N-Ring members.
8. For optimal performance, all N-Ring segments must be configured for the same speed.
Warning:
To prevent a network storm, multiple segments between N-Ring members on one or more N-Rings
must not occur. N-Ring members should only be connected to each other by the N-Ring ports.
2.19.2
Configuration/Port
Sets
A port set is a group of two ports that may be used for an N-Ring. The default N-Ring Port Set is A1/A2.
Click on the
Modify
button to make changes to the Port Sets.
Set:
This field displays the Port set table index.
Ports:
This field indicates the designated pair of N-Ring ports. To reassign different pairs, the Port sets
containing those ports, if any, must be deleted before the ports can be reassigned (a port can only belong to
one port set).
Delete:
To delete a port set, check the box next to the line item to be deleted and click on the
Delete
button.
